911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Remove the underbody panels.
4. Unscrew control screw -2-.
ATF - control screw
Information
To undo and tighten the cap nut for the charging valve, counter with a ring wrench!
5. Screw off cap nut -1- for the charging valve.
Cap nut for ATF - charging valve
6. Screw connection hose 95071 onto charging valve.
Connection hose onto ATF - charging valve
Checking and topping up ATF
^
The transmission must not be in the reduced driving program.
^
The ATF temperature must be between - ATF temperature: 30 degrees Celsius and - ATF temperature: 40 degrees Celsius. An ATF inspection
when the temperature is too high causes insufficient filling, while an inspection when the temperature is too low causes over-filling.
^
The selector lever must be in position "P" and the engine must be idling.
^
The air conditioning must be switched off.