911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-125001.png)
Hose/Line HVAC: Service and Repair
Removing and Installing Compressor/Evaporator Line Near the Engine
Removing And Installing Compressor/evaporator Line Near The Engine
Technical values
Preliminary work
Preliminary work for compressor/evaporator line
1. Drain refrigerant.
Removing compressor/evaporator line
1. Unscrew fastening screw -1- for the compressor/evaporator line at the fuel cooler.
2. Pull off air-conditioning line at the fuel cooler and close off the fuel cooler and the compressor/evaporator line with a plug.
3. Remove engine with the air-conditioning compressor installed.