911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Fusible Link: Service and Repair
Replacing Fuse Element
Technical values
Preliminary work
Preliminary work for fuse element
Remove and open power distributor.
Replacing fuse element
INFORMATION: If a fuse element needs to be replaced, you must also fit a new cover for the fuse elements (blue) and a new seal label (red). The
spare parts are grouped together as one package in the PET.
1. Unclip the cover for the fuse elements with a screwdriver.
2. Unscrew the fastening nuts on the faulty fuse element -1-, remove the washer -2- and take out the fuse element -3-.
INFORMATION: If a fuse element needs to be replaced, you must also fit a new cover for the fuse elements (blue) and a new seal label (red). The
spare parts are grouped together as one package in the PET.
3. Place the fuse element -3- into position, fit the washer -2- and secure with the fastening nuts -1-. - Tightening torque: M6>>8 Nm (6 ftlb.) -
Tightening torque: M8>>15 Nm (11 ftlb.)