911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-569019.png)
16. Fasten ground point under the unit carrier -76-.
16.1. Connect ground straps and tighten with the fastening nut. - Tightening torque: 9 Nm (6.5 ftlb.)
17. Push on connector for pedal sensor -69- until it engages securely.
18. Push on connector for brake light switch -68- until it engages securely.
19. Push on connectors of KESSY/PAS control unit -66 and 67- until they engage securely.
20. Push on connector on Gateway control unit -65- until it engages securely.
21. Push together plug connection between main wire harness and wire harness for door at the left and right -59 and 60- until they engage securely.
22. Clip in wire harness at door sill.
23. Fasten ground point under the passenger seat -54-.
23.1. Connect ground straps and tighten with the fastening nut. - Tightening torque: 9 Nm (6.5 ftlb.)
24. Push on connectors for telephone control unit -50 to 53- until they engage securely.
24.1. Clip in wire harness for telephone control unit.
