911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-569028.png)
5.2. Unscrew fastening screws -2- and nuts -3- and carefully pull the support up and out of the retaining points.
6. Remove mounting saddle for rear-seat backrest.
6.1. Unscrew the two fastening screws -1- and remove mounting saddle for rear-seat backrest -2-.
7. Remove insulating elements in the area of the rear wire harness.
Removing rear wire harness
