911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1.4. Secure the wire harness with two new tie-wraps -3-.
2. Secure the wire harness on the seat shell with two new tie-wraps -1-.
3. Connect airbag connector socket.
3.1. Push the two single connectors -3- into the connector socket -1- (-arrow-) until the single connectors engage securely.
3.2. Fit a new tie-wrap -2- on the connector socket -1-.
4. Insert the airbag connector socket into the seat shell -arrow A- and turn it 90 degrees to the right -arrow B-.
Subsequent work
1. Secure the front backrest cover at the inner side of the seat.
2. Secure the seat cover at the side of the seat and fit the front seat cushion.
3. Install the side airbag.
4. Install the front seat.
Removing and Installing Wire Harness For Battery Wiring
Removing And Installing Wire Harness For Battery System
Tools