911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
8. Remove B+ line -3-.
8.1. Remove grommet -Arrow A-.
8.2. Remove B+ line from grommet -Arrow B-.
8.3. Pull B+ line out of the vehicle interior and remove -Arrow C-.
Removing B+ line from starter to transmission connection point
1. Screw off fastening nut on starter lead at terminal 30 and remove it.
2. Unclip B+ line -5- at cable duct for engine wire harness.
2.1. Unclip B+ line at cable duct -arrows-.
3. Unscrew B+ line -5- at box for B+ line -4-.
3.1. Open box for B+ line at transmission -Arrow A-, unscrew fastening nut -Arrow B- and remove the B+ line.
INFORMATION: For vehicles with manual transmission.