911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5. Remove air-conditioning compressor.
6. Remove throttle valve.
7. Remove the two intake pipes at the sides.
7.1. Unscrew the fastening screws -1- on the intake pipe.
7.2. Pull the cable holder out of the intake pipe -2- and unclip the vacuum line -3- on the intake pipe.
7.3. Pull the intake pipe -2- out of the charger.
8. Remove intake-air distributor.
9. Counter the upper fastening nut -1- for the oil line on the oil tank and unscrew it.
10. Unscrew the three fastening screws -2- for the oil tank. Do not remove oil tank
Removing wire harness for engine