911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
11. Unscrew fastening screw for cable duct (near the heat exchanger), then release and disconnect the connectors.
11.1. Unscrew fastening screw -Z- for the cable duct.
11.2. Release and disconnect connectors -37, 15- one after the other.
11.3. The plug connection -36- for the engine compartment sensor is already disconnected when the air-conditioning compressor is removed.
12. Unclip line for exhaust temperature sensor from the cable duct for the engine wire harness.
13. Pull engine wire harness to the right out of the engine and remove it.
Installing wire harness for engine