911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Screw in fastening screw for cable duct and connect connectors.
3.1. Insert connectors -15, 37- one after the other until the connectors engage securely.
3.2. Screw in fastening screw -Z- for the cable duct. - Tightening torque: 10 Nm (7.5 ftlb.)
4. Insert connector for the knock sensor -16- until the connector engages securely.
4.1. Position the water pump and secure it with the fastening screw -B-.
5. Screw in fastening screw for cable duct and connect connectors.
5.1. Insert connectors -33, 32, 34- one after the other until the connectors engage securely.
5.2. Screw in fastening screw -Z- for the cable duct. - Tightening torque: 10 Nm (7.5 ftlb.)
6. Clip in cable duct -X2- on the fuel gallery.