911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
11. Clip branch of line -C- to speed sender into the holder.
12. Connect connectors for engine wire harness on the left side - cylinder 4 - until they engage securely.
12.1. Connect connectors -7, 8, 9, 13, 19, 1, 2, 3, 24, 42- one after the other until they engage securely.
13. Lay line for exhaust temperature sensor -28- into the retaining clip -A- and close the clip.
Subsequent work
Subsequent work for wire harness for engine
1. Secure the oil tank to the engine with the three fastening screws -2-. - Tightening torque: 23 Nm (17 ftlb.)