911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Screw out the fastening screws -1- and remove the holder with the micro switches.
4. Unclip the wire harness using a plastic wedge -Arrow A- and remove it -Arrow B-.
Installing wire harness for rear spoiler
1. Clip in the wire harness.
2. Install auxiliary brake light.
3. Install engine-compartment light.
INFORMATION: Make sure that pins a are inserted into the bores b.
4. Insert the holder with the micro switches into the hydraulic cylinder and secure with fastening screws -1-.