911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Remove the remains of the old double-sided adhesive tape strips -a- and stick on strips of new double-sided adhesive tape.
2. Insert the air guides -Arrow A- and fold them up -Arrow B-.
3. Insert the clips -2- and then press in the screw-in pins -1- (-Arrow C-).
Connecting plug connection from rear lid to main wire harness
1. Connect the electric plug connection -Arrow A- until the locking lug -1- is felt to engage.
2. Insert the wire harness into the wiring duct -Arrow A-.
3. Close the wiring duct -Arrow B- until the locking lugs are felt to engage.
Subsequent work
1. Install engine-compartment light.
2. Install auxiliary brake light.
3. Install rear spoiler.