911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Camshaft Position Sensor: Service and Repair
Removing And Installing Hall Sender
Tools
Technical values
Preliminary work
1. Remove air cleaner housing.
2. Remove rear wheels using special tool socket-wrench insert P300.
3. Remove rear apron.
4. Remove bumper.
5. Remove the two charge air coolers.
6. Remove cover plate.
Removing hall sender
1. Release and pull off cable plug.
2. Unscrew inner Torx screw (M6 x 16) -1-.
3. Pull off hall sender -2-.
Installing hall sender
1. Fit new O-ring. Grease O-ring lightly with Kluber Syntheso glep (available from Porsche Parts Service).
2. Fit hall sender -2-.
3. Position and tighten inner Torx screw (M6 x 16) -1-. - Tightening torque: 10 Nm (7.5 ftlb.)