911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-348005.png)
5.1. Connect plug connections for lambda sensors with the blue boot -2, 6- on the right and left and insert into the bracket -3, 4-.
Subsequent work
1. Raise the engine.
Raise engine into installation position with a jack, using retainer plate P 9592 to do this.
Screw in and tighten M12 collar nuts.
Tightening torque: 85 Nm (63 ftlb.)
2. Install air cleaner housing.
3. Install pressure pipe.
