911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Exhaust Temperature Sensor: Service and Repair
Removing And Installing Exhaust Temperature Sensor
Technical values
Information
Overview
INFORMATION:
-
The thread of the exhaust temperature sensor can be screwed in again a maximum of five times.
-
Use the Porsche high-temperature grease (part number 000.043.207.07) to grease the thread.
Preliminary work
1. Remove pressure pipe.
2. Remove air cleaner housing.
3. Remove throttle housing.
Removing exhaust temperature sensor
1. Remove exhaust temperature sensors from the bottom of the engine.
1.1. Loosen and unscrew cap screws -1, 3- for the exhaust temperature sensors at the turbochargers.
1.2. Unclip lines for sensors from the brackets -2, 4-.