911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Accelerator Pedal: Service and Repair
Removing And Installing Accelerator Pedal
Information
INFORMATION: The accelerator pedal is an electronic accelerator pedal unit without a mechanical accelerator cable. The electric printed circuit
board, among other things, is integrated in the accelerator pedal unit. On vehicles with Tiptronic transmission, the accelerator pedal unit also features a
spring-loaded aneroid diaphragm -3- for kickdown simulation. The integrated pedal stop obviates the need for a basic kickdown setting.
Removing accelerator pedal
Removing
1. Loosen accelerator pedal.
Remove screw -4-.
2. Remove accelerator pedal.
Pull accelerator pedal forward slightly and remove it in an upward direction.
3. Pull off electric connector on accelerator pedal.