911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Intercooler: Service and Repair
Removing And Installing Charge Air Cooler
Tools
Technical values
Preliminary work
DANGER:
Vehicle raised incorrectly.
-
Danger of fatal injury or material damage should the vehicle fall down.
-
Raise the vehicle at the prescribed jacking points.
1. Remove rear wheels. Use the specified special tool socket-wrench insert P300 so as not to damage the wheel rims.
2. Remove rear apron.
Removing charge air cooler
1. Remove rapid-action coupling from bottom of suction hose and top of pressure hose by pulling the spring clamps on the charge air cooler.