911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Incorrect tool for changing the spark plugs.
-
Ceramic body breaks.
-
Use approved tool only.
18. Unscrew the spark plugs using the tool spark plug socket wrench NR.14 with 3/8" extension, 16° movable NR.15.
Installing spark plugs
CAUTION:
Incorrect tool for changing the spark plugs.
-
Ceramic body breaks.
-
Use approved tool only.
1. Install spark plugs using spark plug socket wrench NR.14 and 3/8" extension, 16° moveable NR.15. - Tightening torque: 30 Nm (22 ftlb.) -
Tightening torque: 25 Nm (19 ftlb.)
2. Insert ignition coils into the spark-plug recesses and tighten the two M6 x 25 Torx screws on each one. - tightening torque: 10 Nm (7.5 ftlb.)
3. Insert and tighten ignition coil screws that are difficult to reach (cylinder 2) using a Torx bit with a ball head.
4. Connect cable plugs and position rubber sleeves on the coils. The cable plugs must engage audibly; check that they are seated securely.