911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1.1. Fit knock sensor -1- with screw -2- and align it. Then tighten screw. - Tightening torque: 20 Nm (15 ftlb.)±2 Nm (±1.5 ftlb.)
1.2. Push on cable plug -3-.
2. Insert and fit compressor. - Tightening torque: 23 Nm (17 ftlb.)
3. Install throttle housing. - Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
1. Install air cleaner housing.
2. Install pressure pipe.
3. Connect the battery.