911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3.2. Position lambda sensor 1-3 -3- upstream of catalytic converter -9- and tighten it with an open ring wrench Nr.98 and torque wrench.
Tightening torque: 55 Nm (41 ftlb.)±5 Nm (±3.5 ftlb.)
4. Route lambda sensor wire.
4.1. Route lambda sensor wire 4-6.
Clip lambda sensor wire -2- with the blue boot into the brackets -3, 4, and 5-.
4.2. Route lambda sensor wire 1-3.
Clip lambda sensor wire -2- with the blue boot into the brackets -3, 4 and 5-.
5. Connect plug connections for lambda sensor wire.