911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-303004.png)
13. Unscrew two Torx screws (M6 x 12) -Arrows- and remove cover plates.
14. Slide rubber sleeves down on the ignition coil connectors.
15. Release cable plugs -1- and pull them off the ignition coils.
16. Unscrew inner Torx screws (M6 x 25) -Arrows-. The intake air line must be moved when removing the ignition coil on cylinder 3.
17. Remove ignition coils.
CAUTION:
