911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-25002.png)
Installation position
Warning
Sudden voltage interruption of the power supply to the control module.
^
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
1. Unlock and disconnect electric plug connections on the main wire harness -a-.
Unlocking electric plug connections
2. Unlock retaining bar -a- and open it up.
