911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Unlock electrical connector -2- on steering wheel -A- and remove.
Removing airbag lead:
4. Unlock electrical connectors -1, 2- with a screwdriver and unplug.
5. Unplug electrical connector -3-.
Installing driver's airbag unit
INFORMATION: If a new component (e.g. sensor, airbag control unit, airbag unit) of the airbag system has to be installed, the new component will be
supplied with a barcode sticker (tear-off label).