911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing And Installing Side Airbag (Folding Sports Bucket Seat)
Technical values
Preliminary work
1. Disconnect the battery.
2. Partly loosen the front backrest cover at the inner side of the seat. Refer to Removing and installing front backrest cover (folding sports bucket
seat).
Removing side airbag (folding sports bucket seat)
WARNING: Incorrect triggering of airbag module.
-
Danger of injury and damage to property as a result of incorrect handling of airbag units.
-
The safety regulations. Refer to Safety regulations for handling airbag and belt tensioner units must be followed.
-
The airbag unit must always be stowed so that the airbag opening faces upwards.
-
If removed for an extended period, the airbag unit must be kept in a locked place.
-
Remove ignition key. Disconnect battery. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat
frame) is avoided.
-
After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.
INFORMATION: If a new component (e.g. sensor, airbag control unit, airbag unit) of the airbag system has to be installed, the new component will be
supplied with a barcode sticker (tear-off label).