porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Seat Belt Systems > < Removing and Installing AWS Control Unit|Page 3589
Page 4
background image

10.1.1. If there is no weight on the passenger's seat, compare values (see table below) using the PIWIS Tester. The Passenger Airbag Off

indicator light in the centre console must not come on.

10.1.2. Place the special tool test weight P 9742 on the passenger's seat. The Passenger Airbag Off indicator light in the centre console must

come on. Compare values (see table below) using the PIWIS Tester.

10.1.3. Get an assistant with a body weight of more than 55 kg, for example, to sit on the passenger's seat. The Passenger Airbag Off

indicator light in the centre console must not come on. Compare values (see table below) using the PIWIS Tester.

11. Read out and erase the fault memories in the Airbag and AWS control unit, perform a test drive and then read out the fault memories again. If

faults are found, determine the cause using the PIWIS Tester and correct the faults.

Seat Belt Systems > < Removing and Installing AWS Control Unit|Page 3589