911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-60001.png)
Headlamp Alignment Sensor: Service and Repair
Removing and Installing Front Angle Sensor For Headlight Levelling System
Removing And Installing Front Angle Sensor For Headlight Levelling System
Tools
Technical values
Preliminary work
Preliminary work - front angle sensor for headlight levelling system
Remove front underbody panel.
Removing front angle sensor for headlight levelling system
1. Hold intermediate link on rotary lever with second open-ended wrench and screw off fastening nut -2-.
2. Push back rubber cover -1- over the electrical plug connection, release electrical plug connection -A- and remove connector from angle sensor.
