911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Release both locking hooks and pull the relay carrier up and out of the retaining frame.
Installing relay carrier
1. Engage relay carrier on retaining bracket and screw down with the two fastening screws -1-. - Tightening torque: 4.5 Nm (3.5 ftlb.)
2. Place retaining brackets on the body and screw down with the four fastening screws -4- and the fastening nut -5-. - Tightening torque: 2.2 Nm (1.5
ftlb.) - Tightening torque: 4.5 Nm (3.5 ftlb.)
Installing relay carrier for cabriolet
1. Push and engage the relay carrier into its retaining frame.