porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2682 > < Procedures|Page 2680
Page 17
background image

6.1. Position length compensation at the steering column and fasten with the expansion rivet.

7. Fasten ground points on dashboard bracket.

7.1. Fit ground straps and tighten with fastening nuts. - Tightening torque: 9 Nm (6.5 ftlb.)

8. Push on connector for antenna amplifier, left and right -89 to 93-.

9. Remove protective film of adhesive strip on main wire harness -area A- and affix main wire harness to A-pillar.

10. Clip in main wire harness at front of roof frame.

11. Clip in cable duct at front of roof frame.

Procedures|Page 2682 > < Procedures|Page 2680