porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2689 > < Procedures|Page 2687
Page 24
background image

23. Push through main wire harness in direction of luggage compartment.
24. Fit grommets -16- left and right.

25. Clip in wire harness to CD changer/navigation unit -arrows-.

26. Clip in wire harness to loudspeaker amplifier -Arrows A- and fix with new adhesive tape -Arrow B-.

27. Clip in wire harness for front end control unit -arrow-.
28. Push on connector for tyre pressure monitoring system control unit -15- until it is felt to engage.
29. Push on connector for brake fluid sender -14- until it is felt to engage.
30. Push on connector for hydraulic unit -13- and lock it.
31. Push together plug connection between main wire harness and front-end wire harness, left -12- until it engages securely. Clip in connector socket.

32. Secure ground point left -11-.

32.1. Connect ground straps and tighten fastening nut. - Tightening torque: 9 Nm (6.5 ftlb.)

Procedures|Page 2689 > < Procedures|Page 2687