porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2706 > < Procedures|Page 2704
Page 41
background image

8. Remove cover for centre underbody.

Preliminary work for B+ line from starter to transmission connection point

1. Disconnect battery.
2. Remove throttle housing.
3. Remove generator.
4. Remove rear underbody cover.

Preliminary work for engine ground strap

1. Lift the vehicle.

Removing wire harness for battery wiring

Removing ground strap and B+ line of battery

1. Remove ground strap for battery -1-.

1.1. Unscrew fastening nut of battery ground strap to body and remove ground strap for battery.

2. Remove B+ line for battery -2-.

2.1. Cut through the positive cable of main wire harness -3- at the place indicated -arrows-.
2.2. Remove binding band from main wire harness until the sheathing of the positive cable -3- can be removed -Arrow A-.
2.3. Unscrew B+ line from battery.
2.4. Release and pull off B+ line from power distributor.
2.5. Remove B+ line for battery.

Procedures|Page 2706 > < Procedures|Page 2704