911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION:
-
If a spare part is requested, a standard wire harness with a connection point (plug connection) is supplied for all models. This wire harness is
installed as of model year 2006.
-
For model year 2005 vehicles, the old plug connection must be removed from the old wire harness and fitted on the new wire harness.
-
Pin assignment according to wiring diagram.
1. Disconnect plug connection between front-end wire harness and main wire harness, right -1-.
1.1. Release plug connection between front-end wire harness and main wire harness, right -arrow a- and disconnect -arrow B-.