911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Open the wiring duct -Arrow A- and take out the line -Arrow B-.
Removing air guide
1. Unscrew the screw-in pins -1- and remove the clips -2- (-Arrow A-).
2. Fold out the air guides -Arrow B- and remove them -Arrow C-.
Removing fan motor
1. Disconnecting electric line
1.1. Release the connector -Arrow A- and pull it off -Arrow B-.
1.2. Take the line out of the holder -Arrow C-.
2. Unscrew the fastening screws -1- and take out the fan motor -Arrow D-.
Loosening pump unit for spoiler drive
1. Unscrew the fastening screws -1- and remove the cover with the pump unit -Arrow A-.
2. Pull off the two plug-in contacts -Arrow B-.
Removing wire harness for rear spoiler