911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6. Unscrew the third fastening screw -2- (behind the left drive shaft in direction of travel -3-), for the coolant line bracket.
7. Pull coolant lines downwards and in doing so check for sufficient clearance.
8. Unscrew the two fastening screws for the shutoff valve bracket -1-.
9. Using a screwdriver, prise the coolant lines out of the transmission bracket (in direction of travel to rear). >> The lines can now be easily pulled
downwards and to the side.
Removing the starter
Removing starter - manual transmission