911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Test tool 9623
Fit circlip -D-.
Fitting circlip
2.2.
Fit (attach) the pressure line (thinner line) - as of model year 2009
Replace the O-ring -7- and axial spring -5- if necessary. Then connect the lines (plug-in coupling) -1 and 2- (-(arrow)-).
Connecting lines/available spare parts
Check that the plug-in coupling is locked correctly.
Pull on the connector -1- to check that the plug-in coupling is locked (push and pull slightly in axial direction).
Counter at the plug-in sleeve -2- while doing this.
If the plug-in coupling is locked correctly, you should be able to feel slight axial play between the connector -1- and plug-in sleeve -2-. A
plug-in coupling cannot be partly locked.
Another sure sign of a correctly locked plug-in coupling is the bulbous shape of the axial spring -5-.