911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-618004.png)
Securing antenna of tire pressure monitoring system with fastening screw
Installing antenna of rear tire pressure monitoring system
Information
When replacing antenna of rear tire pressure monitoring system, the holder must also be replaced.
1. Clip new holder -1- in antenna of tire pressure monitoring system until it is felt to engage in the locking tab -arrows-.
Clipping new holder in antenna of tire pressure monitoring system
2. Insert plug until it is felt to engage.
Pushing plug onto antenna of tire pressure monitoring system
3. Position antenna of tire pressure monitoring system and secure with both fastening nuts -1-. - Tightening torque: 1.5 ftlb.
