911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Oil filler screw on final drive
Warning
Risk of scalding from hot oil
-
Let the oil cool down
-
Wear personal protective gear (goggles, gloves)
Caution
Oil fill level too low
^
Risk of damage to components
-
Do not start engine.
-
Do not tow the vehicle.
2. Unscrew oil drain plug and drain oil.
Oil drain plug for final drive
Topping up oil for final drive
Caution
Oil fill level too low
^
Risk of damage to components
-
Do not start engine.
-
Do not tow the vehicle.
1. Replace sealing ring for drain plug and clean and tighten the drain plug. - Tightening torque: 25 Nm (19 ftlb.)
2. Fill oil for final drive with ATF filling device for filling transmission NR.161 until oil escapes at the oil filler opening.
Replace sealing ring for filler plug, clean filler plug, and tighten. - Tightening torque: 22 Nm (16 ftlb.)