911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Oil filler screw on final drive
Warning
Risk of scalding from hot oil
-
Let the oil cool down
-
Wear personal protective gear (goggles, gloves)
The oil level is correct if oil emerges. Continue with Step 3.
If no oil escapes, the oil level in final drive is too low. Continue with position 2.
2. Fill oil for final drive with ATF filling device for filling transmission NR.161 until oil escapes at the oil filler opening.
3. Replace sealing ring for filler plug, clean filler plug, and tighten. - Tightening torque: 22 Nm (16 ftlb.)
Subsequent work
1. Fit underbody panels.
2. Lower the vehicle.