911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-414003.png)
Unlocking and opening retaining bar
3. Remove transmission control unit from the bracket.
Release and pull off electric connectors on the control unit.
4. Release, open and remove electric connectors on the control unit -arrow-.
Installing transmission control unit (PDK)
1. Connect and lock electric connectors on the transmission control unit -arrow-.
Plugging in and locking connectors on the control unit
2. Position transmission control unit in the bracket.
