911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Torque Converter: Service and Repair
Removing and installing torque converter
Preliminary work
1. Remove transmission.
2. Put transmission in horizontal position.
Removing torque converter
1. Locating pin 95951 (long) must be removed from the transmission housing.
Locating pin
Information
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
2. Screw two screws (M8) into torque converter and remove torque converter using the screws from the transmission input shaft.