911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing control unit
Installing electrohydraulic control unit
Information
The selector lever must be in position P in order to fit the electrohydraulic control unit.
1. Insert electrohydraulic control unit into the transmission from below. The selector valve must engage in the driver of the notched plate.
Selector valve and driver
2. Screw in fastening screws and tighten hand tight.
3. Tighten fastening screws.
4. Thinly coat gasket on the suction collar of the ATF filter with Vaseline and insert filter from below into electromagnetic control unit.