911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Differential Lock: Service and Repair
Removing and installing electromagnetic clutch
Preliminary work
Danger
Vehicle raised incorrectly.
^
Danger of fatal injury or material damage should the vehicle fall down.
-
Raise the vehicle at the prescribed jacking points.
1. Jack and raise the vehicle at the prescribed jacking points.
2. Remove underbody panelling.
3. Remove the cardan shaft.
4. Drain clutch fluid for front final drive.
5. Remove front final drive.
6. Remove support for front final drive.
Removing electromagnetic clutch
1. Clamp the final drive in a vice.
Retainer plate 9756 must be secured on the transmission housing and clamped in a vice.