911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Differential Output Shaft: Service and Repair
Removing and Installing Left Halfshaft Flange
Removing and installing left halfshaft flange
Preliminary work
1. Remove drive shaft on transmission.
Removing left halfshaft flange
Information
The halfshaft flange screw is coated with securing liquid. Always loosen and unscrew the screw only by hand. Loosening the screw using a
commercially available electric screwdriver can cause the shaft bevel gear and threaded disc to move inwards out of the splines, rendering the screw
ineffective. The differential lock would then have to be disassembled. Avoid this at all costs.
Removing drive shaft flange
1. Loosen screw -1- and remove it.
Halfshaft flange
2. Remove halfshaft flange -2-.
Installing left halfshaft flange
1. Install halfshaft flange.