911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
-
Temperature: at least 10°C
-
Fixing time: approx. 1 hour
1. Affix suction cups -B- to the rear window.
INFORMATION: Two persons are needed to insert and adjust the rear window.
2. Insert the rear window at the top of the window aperture and lay it down carefully into the aperture.
3. Press the rear window fully upwards, pressing on the lower edge of the glass while doing so. Use adhesive tape to prevent the rear window from
slipping at the side and the top.
Completing the rear window (hardtop) after installation
1. Place outer side of the hardtop on the assembly fixture.
2. Connect electrical plug connection -8- at left and right of rear window.
3. Engage roof liner -7- to the rear using plastic rail -6-.