911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Fix the hose guide in place on the left spray nozzle using a tie-wrap.
Subsequent work
Subsequent work for spray nozzle of headlight washer system
1. Install fog lights.
2. Install front apron.
3. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a
left or right spray nozzle, or whether the water reservoir for the headlight washer was completely emptied or not, the bleeding process can require
frequent activations of the spray nozzle.
Removing and installing spray nozzle head
Removing spray nozzle head
1. Insert an angled scriber, for example, into the opening in the nozzle head and pull the spray nozzle up and out.
2. Hold the nozzle head at the top and disengage the catch on the spray nozzle with a small screwdriver -A-. The nozzle head is released from the
spray nozzle and the spray nozzle moves back into place.
Installing spray nozzle head