911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Function
Using this menu item, you can code the traffic broadcast loudspeaker boost.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units menu and confirm with the >> key.
-
Select CDR23 in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Coding in the CDR23 function selection menu and confirm with the >> key
-
Select Traffic broadcast loudspeaker boost in the CDR23 coding menu and confirm with the >> key
-
Enter the desired value for the traffic broadcast loudspeaker boost and code with F8 key
Menu item
-
GAL (noise-dependent loudspeaker boost)
Function
Using this menu item, you can code the loudspeaker boost, depending on the noise level:
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units selection menu and confirm with the >> key
-
Select CDR23 in the CDR23 function selection menu and confirm with the >> key.
-
Select Coding in the CDR23 function selection menu and confirm with the >> key
-
Select GAL in the CDR23 coding menu and confirm with the >> key
-
Enter the desired noise-dependent loudspeaker boost and code with the F8 key.
Menu item
-
Vehicle type vehicle coding
Function
Using this menu item, the vehicle type vehicle coding can be entered.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units menu and confirm with the >> key.
-
Select CDR23 in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Coding in the CDR23 function selection menu and confirm with the >> key
-
Select Vehicle type vehicle coding in the CDR23 menu and confirm with the >> key.
-
Select vehicle type 911 Turbo (996) and code with the F8 key.
Menu item
-
Vehicle version vehicle coding
Function
Using this menu item, you can code the vehicle version:
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units menu and confirm with the >> key.
-
Select CDR23 in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Coding in the CDR23 function selection menu and confirm with the >> key
-
Select Vehicle version vehicle coding in the CDR23 menu and confirm with the >> key.
-
Select vehicle version as required and code with the F8 key.
Menu item
-
Air conditioning, with/without
Function
Using this menu item, you can code the equipment with/without air conditioning:
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ->| key
-
Select PCM in the Control units menu and confirm with the >> key.
-
Select CDR23 in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Coding in the CDR23 function selection menu and confirm with the >> key
-
Select Air conditioning with/without in the CDR23 coding menu and confirm with the >> key.