911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Coding Table (Part 4)
Coding
It is possible to extract the chassis number and to code the PCM2 on a country-specific basis in the Modify coding menu.
Menu item
-
PCM2 code
Function
It is possible to code the PCM2 code under this menu item after replacing the PCM2.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the control modules selection and confirm with the >> key.
-
Select PCM2 GW in the PCM2 function selection and confirm with the >> key.
-
Select menu item Coding.
-
Select menu item PCM2 code.
-
Take the PCM2 code from IPAS, enter it and code it with the F8 key.
Menu item
-
Vehicle type vehicle coding
Function
Under this menu item, the PCM2 GW corresponding to the vehicle type can be coded.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control module menu and confirm with the >> key.
-
Select PCM2 GW in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Coding in the PCM2 GW function selection menu and confirm with the >> key.
-
Select Vehicle type vehicle coding in the Coding menu and confirm with the >> key.
-
Select 911 Turbo (996) in the menu and code with the F8 key.
Menu item
-
Vehicle version vehicle coding
Function
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control module menu and confirm with the >> key.
-
Select Coding in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Vehicle version in the PCM2 coding menu and confirm with the >> key.
-
Select the relevant version Coupe, Cabrio, Targa in the menu and code with the F8 key.
Menu item
-
Right/left-hand drive vehicle coding
Function
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 Turbo (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control module menu and confirm with the >> key.
-
Select Coding in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select Right/left-hand drive vehicle coding in the PCM2 GW coding menu and confirm with the >> key.
-
Select Right/left-hand drive vehicle coding in the Modify PCM2 coding menu and confirm with the >> key.
-
Select Right or left-hand drive in the menu corresponding to the vehicle equipment and code with the F8 key.
Menu item
-
Air conditioning with/without
Function