911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
S 8.2.2 Painting magnesium rims
WARNING:
-
Damage and possible injury due to improper repair of paint damage to magnesium rims.
-
Improper repairs to magnesium rims can result in corrosion, which could reduce the operating strength and possibly lead to a broken
rim.
-
Replace the rims if there are any defects due to corrosion.
NOTE:
-
We recommend the following procedure for repairing paint damage to vehicle rims: If one of the following conditions is met, the rim should be
replaced:
-
Paint damage down to the base material in the area of the rim spokes, particularly in the section between the rim flange and spokes.
-
Corrosion defects in the area of the rim spokes, particularly in the section between the rim flange and spokes.
-
Paint damage that extends to the base material may only be repaired on the outer part of the rim flange.
-
Always avoid areas sanded through to the base material.
-
Surface painting is permitted after Level 2. The topcoat build-up corresponds to the procedure.
NOTE: It is not possible to remedy damage to deeper surface layers using equipment available in the workshop. It may be possible to re-coat the
surface of the rim.
S 8.2.3 Painting 993 Turbo S/Carrera GT rims
Warning: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
First, the rim is painted completely in accordance with -> S 8.2.1 "Standard rim painting".
-
Color: Sterling silver metallic 9A1, miscible in Standox(R) Basecoat and Standohyd(R) Basecoat.
-
Exception: Always dry Standox(R) Basecoat (Phase III) and clear lacquer (Phase IV) for 10 minutes at an object temperature of 80° C.
Then proceed as follows: