911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
New/current version: Rate-of-turn sensor with part No. 996.606.145.00.
Removal
Information:
^
For the removal and installation of the hydraulic unit -D-, the booster pump -A- of the brake master cylinder -B- and the brake booster -C- remains
fitted (installed).
1. Switch off ignition. Remove cover -A- from the hydraulic unit/brake unit.
2. Hold down brake pedal with pedal holder, so that the brake fluid does not run out of the expansion tank completely.