911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
6. Install new/current support -B-.
7. Install center console -C-. Then install center console front part -B-.
8. Install side panel linings in front of the center console.
9. Connect battery ground cable.
10. Code the radio and PCM.
11. Carry out the following tests:
-
Read out and erase the fault memories of the airbag, PCM and PSM control modules with the Porsche System Tester 2. Additionally perform
the static test in the PSM system.
-
Then start the engine. The PSM-related lights in the instrument cluster must go out when the engine is running.
-
Read out the PSM fault memory again. There must not be any stored faults.